A residential gas meter on a tan stucco wall with a newly fitted seismic gas shutoff valve on the house side of the piping, a plumber's hand on a pipe wrench

Gas line plumber in Roseville, CA

Gas piping runs from the PG&E meter on the side of the house to the water heater, the furnace, the range and the dryer. We repair leaking lines, run new ones for new appliances, pressure test what we touch and fit seismic gas shutoff valves that close on their own in a strong earthquake. Every gas valve in the house goes on your map, because in an emergency it is the one thing you need to find fast.

  • Leaks found and fixed, lines pressure tested
  • Seismic gas shutoff valves, State Architect certified
  • Every gas valve marked on your map

Or call or text 916-555-0148

Tell us about the gas work you need

We usually answer the same day. Tell us what you have noticed and roughly when the house was built.

Water spraying or a smell of gas? For gas, leave the house and call PG&E or 911 first. For water, shut the main off, then call or text: 916-555-0148

Where the gas comes in, and why we start there

Every gas line in the house starts at the meter, and the first valve after it is the one that shuts the whole house off. On a lot of visits it is stiff, painted over or hidden behind a bush. We find it, make sure it turns, and circle it on the plan we leave you, with a note of which way is closed.

From there we follow the piping to each appliance and check the shutoffs, the flexible connectors and the joints. If a joint is leaking we repair it and pressure test the line. If you want a seismic gas shutoff valve, it goes on the house side of the meter, where it can close the supply to everything at once.

Book a plumber who maps it first

Close view of a gas meter and black iron piping on a stucco wall, a seismic shutoff valve fitted after the meter, gravel below

Gas work we do most often

All of it pressure tested, permitted where required and drawn on your map.

Leak repairs

A smell near an appliance or a joint, found with a test, repaired and tested again.

Seismic shutoff valves

Certified earthquake valves fitted at the meter, with the permit.

New appliance lines

A gas range, dryer, fireplace insert or grill, with its own shutoff.

Water heater connections

New flexible connectors and a shutoff at the heater when we replace it.

Gas line permits, place by place

Gas work is permitted work. We pull it and book the inspection.

Where the house isPermit officeWhat we know about it
RosevilleCity of Roseville BuildingThe residential plumbing checklist asks for a gas piping schematic where it applies
Citrus HeightsCity of Citrus HeightsNew gas lines are on the list of projects that need a permit
LincolnCity of LincolnGas line work is one of the online plumbing permits, with a site plan
Rocklin and FolsomEach city's own building departmentWe confirm the current rule and testing when we book
Granite BayPlacer CountyGranite Bay is unincorporated, so the county issues the permit

How a gas job goes

Safety first, then the same route as every visit.

  1. Make it safe.

    If there is a smell, the gas is off and the utility has been called before we start.

  2. Walk the line.

    From the meter to each appliance, every valve and joint checked and drawn.

  3. Repair or install.

    The fix or the new line, with the permit, then a pressure test.

  4. Inspect and hand over.

    The inspector signs off and every gas valve is circled on your map.

Book a plumber who maps it first

“We asked about a seismic gas shutoff valve after a neighbor fitted one. They explained what it does and what it does not do, fitted a certified valve at the meter with the permit, and marked it on the map with the manual shutoff.”
Carmen L. Gas line work, Folsom Sample review,

You deal with Wes, from the meter to the last valve

Wes Lindqvist, owner of Birch & Brass Plumbing, holding a clipboard with a hand-drawn house plan in front of a Roseville ranch house

Wes Lindqvist, owner and licensed plumbing contractor

Wes walks the house with you, draws the map as he goes and writes the price before any work starts. You deal with him from the first call to the folder in your kitchen drawer.

Book a gas line visit

We usually answer the same day. Tell us what you have noticed and roughly when the house was built.

Water spraying or a smell of gas? For gas, leave the house and call PG&E or 911 first. For water, shut the main off, then call or text: 916-555-0148

Gas line questions we hear most

I smell gas. What should I do?

Leave the house first. Do not switch lights or appliances on or off, and do not use a phone inside. From outside, call PG&E or 911. Once the utility has made it safe, call or text us and we will find the leak, repair the line and test it.

What is a seismic gas shutoff valve?

A valve fitted at the gas meter that closes on its own when it senses strong shaking, so gas stops flowing to the house in an earthquake. California's Division of the State Architect certifies these earthquake sensitive valves and publishes the list of certified models. We fit certified valves only, and installation is under the local building department, so we pull the permit.

Is a seismic gas shutoff valve required in my town?

State law lets a city or county adopt an ordinance requiring earthquake sensitive gas shutoff devices. We did not find such a requirement for homes in Roseville, Rocklin, Citrus Heights, Lincoln, Folsom or Placer County, but rules change, so we check with the building department when you book. Many owners fit one by choice.

Does gas line work need a permit?

Generally, yes. Citrus Heights lists new gas lines among the projects that need a residential permit. Lincoln includes gas line work among its online plumbing permits, with a site plan. Roseville's residential plumbing checklist asks for a gas piping schematic where it applies. We pull the permit and the line is pressure tested before the inspector signs off.

Can you add a gas line for a new range or a backyard grill?

Yes. We size the line for every appliance on it, run it, pressure test it and put a shutoff at the new appliance. The new run and its valve go on your house plan with the others.

Call or text 916-555-0148

A 1970s ranch house on a quiet Roseville street at dusk, warm light in the windows, a valley oak in silhouette and a white work van at the curb

Need gas work, or a seismic valve? Tell us.

What the work is and which appliances are on the line. If you smell gas right now, leave the house and call PG&E or 911 first.

Book a plumber who maps it first

We usually answer the same day. Tell us what you have noticed and roughly when the house was built.

Water spraying or a smell of gas? For gas, leave the house and call PG&E or 911 first. For water, shut the main off, then call or text: 916-555-0148

Call or text 916-555-0148